UV-C radiation for the prevention of hospital infections

Correct and consistent disinfection is of enormous importance, especially in medicine. In fact, hospital infections are among the biggest cost drivers and risks in healthcare. However, UV-C disinfection devices can render the dangerous viruses and bacteria harmless in various areas.

You will find highly efficient equipment for the OR such as UV fans, various UV-C boxes and cabinets for disinfecting surgical instruments as well as suitable instruments for surface disinfection. The use of UV-C combats bacteria, mold spores and viruses without the use of chemicals or dangerous vapors and is ideal for use in medicine.

In this highly sensitive area, too, our qualified specialists will provide you with sound advice to help you find the best product for your needs.


Highest quality and performance for the benefit of health

Thanks to its Class 1 medical approval, the UV-FAN is perfectly suited for the operating room area and destroys, among others, multi-resistant germs (MRSA), viruses and bacteria. With its high UV-C output and mirrored irradiation chamber, the UV-FAN achieves a Log 3 (99.9%) with respect to hospital germs and even a Log 8 (99.999999%) at 150m3/h with respect to the SARS-CoV-19.

Stethoscope disinfection before each use is not always easy to implement. But with the StetClean, it's easier than ever. The battery-powered device hooks into the chest pocket and has room for standard stethoscopes. As soon as the stethoscope is plugged in, a disinfection routine is automatically started and is available again in a disinfected state for each use.

We have one of the most comprehensive ranges around medical UV-C disinfection - from products for air purification, boxes and cabinets, surface disinfection as well as the dosimeter cards as a control mechanism for GMP applications. Laboratory tests are available for the correct irradiation dose for most organisms; know their respective required UV-C dose. Benefit from our broad knowledge and experience!


PLAY IT SAFE WITH US!
 HERE YOU WILL FIND OUR SOLUTIONS FOR A WIDE RANGE OF APPLICATIONS:



DENTISTS

In Zahnarztpraxen ist die Aerosolbelastung extrem hoch, da der Patient beim Atmen den Mund nicht schliessen kann.

Patientenzimmer

The risk of infection is significantly increased in the patient's room or in the hospital environment. It is not only the SARS-CoV-19 viruses that occur in the waiting area of the test infrastructure, but also multi-resistant germs such as MRSA or influenza, rhinovirus, norovirus and many more.

Waiting room

In the waiting room of a doctor's office, patients are often exposed to the pathogens present even as 20 minutes. In addition, there is an increased total germ count in the air, since healthy people usually do not go to the doctor.

Laboratory

Laboratory disinfection, in this case a combination of air cleaning and surface disinfection, is often used in PCR test laboratories to prevent not only the total germ count in the air, but also a risk of carryover to surfaces.

Sanitation

bedeutet, die mikrobielle Belastung in akzeptable und optimale Hygienestandards welche die von der beabsichtigten Nutzung der Umgebungen abhängen. Betroffene Sanitation wird oft verwendet als "rein", jedoch muss eine Reinigung vorausgehen.

DESINFECTION

means reducing the microbial load as low as possible, i.e. at least 1 log (90%) of the bacteria present. The reduction of the microbial load is a basic value n disinfection and is expressed in Log Reduction. A good level of disinfection is about 2 logs (99%). A very good disinfection is 3 logs (99.9%) and 4 logs (99.99%) is considered a very high standard.

STERILISATION

is the next stage, which is to achieve any complete re-duction of the microbial load, we can talk about sterilization, if the reduction is proven to be not less than 6 logs, which means (99.9999%). To declare sterility, the test must be proven and certified by a third party.

PLAY IT SAFE WITH US!
 HERE YOU WILL FIND OUR SOLUTIONS FOR A WIDE RANGE OF APPLICATIONS: